The Wireless Digital Ratchet Torque Wrench transmits peak data up to 130 feet. One wireless receiver supports up to ten wireless ratchet or adjustable wrenches. Wrenches store up to 200 data when out of range of the receiver. Turn the power off then on to upload stored data to the software when back in range. All measurements are logged into the included Torque Management software and can be exported in CSV format.
The wireless wrenches are built with forged steel ratchet heads. Positive-lock drives keep sockets on. A 36 tooth gear with double claw ratchets allows smaller movements between clicks. The unique power sensor in the ergonomic handle accurately detects and analyzes load applied to the grip to enable precise torque measurement.
Wrenches measure in peak mode, peak with auto zero reset, and real time. Five programmable Go/No Go torque presets can be stored in memory to enable users to check frequently used values. Presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of preset torque using LED and audible indicators (Presets cannot be set at less than 10% of capacity). Selectable lbf-in, lbf-ft, kgf-m, and N-m units. Uses a Panasonic lithium ion battery, CR123A. Wireless receiver, GED-Z is included.