Home > Durometer, Torque & Speed Measurement > Torque Measurement > Digital Torque Calibrators > Electric Power Driver Calibrator > Series i Torque Calibrators

Series i Torque Calibrators

Series-i Torque Calibrator

Series-i Torque CalibratorSeries-i Torque Calibrators for Power Drivers & WrenchesCD-150M Digital Torque TesterDI-11 Digital Torque TesterSeries-i Torque Calibrator KitSmart AdaptersSJ Spring Adapters

Series i Torque Calibrators

Get a QuoteBuy NowVideo

Torque Calibrators for Power Drives & Wrenches
Series i

  • i8,i80,i150m,i11,i-8,i-80,i-150m,i-11,cd8,cd80,cd150m,cd11,cd-8,cd-80,cd-150m,cd-11,di8,di80,di150m,di11,di-8,di-80,di-150m,di-11

The Series i torque calibrator measures the peak torque non-impact electric/air drivers apply to a screw. Under tightened bolts and screws do not generate sufficient clamp force and can lead to loosening and assembly failure. Over tightening, past the yield point, permanently deforms the screw joint and can also lead to failure which is why proper tightening torque is so important. Manual torque wrenches can also be calibrated.

Unique Smart Adapters

The unique Smart Adapters simulate the screw joint and do not need to be backed-off after each test. This features increases testing efficiency and ease of use by reducing the time between each test. Results can be downloaded through the USB port for analysis with data acquisition software. The Series i torque calibrators are compatible with Imada’s SW-1SV-USB software.

The peak torque or peak down torque in breakaway tests is captured automatically. The Series i torque calibrator displays Max, Min and Avg statistics. The tester can read values in lbf-in, kgf-cm, N-cm and  N-m.

What’s Included

All series i torque testers are sold in kit form complete with tester, hard carrying case, 2 driver adapters and AC€ˆcharger/adapter. All testers come with a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge.

Do not use with impact or air tools. See DI-1M or DI-4B-25 impact wrench torque testers.

Series i Ranges (Resolution)

Accuracy: ±0.5% F.S. ±1 LSD
More Ranges ►
ModelCapacity
lbf-inkgf-cmN-cmN-m
i-80.020~6.9700.020~8.0000.20~78.60—-
i-800.20~69.700.20~80.002.0~786.00.020~7.860
CD-150M1.0~130.01.0~150.01.0~15000.10~15.00
DI-111.0~174.0 (0.1)1.0~200.0 (0.1)—-0.10~20.00 (.01)

Series i Standard Features

  • Wide measuring range up to 174 lbf-in
  • Selectable units lbf-in, Kgf-cm, N-cm and N-m
  • Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing
  • 2 – driver adapters included: i-8 & i-80 come with smart adapters, CD-150 & DI-11 come with spring adapters
  • Peak, Real Time and Peak Down measuring modes (selectable)
  • Measure both clockwise and counterclockwise
  • USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
  • Statistics: number of data, Max, Min, Avg
  • Heavy-duty metal construction
  • Runs on internal NiCad batteries or AC adapter
  • 3/8″ drive for socket wrenches
Specifications - Driver Adapters (2 included)
More Ranges ►
AdapterModel
 		Range lbf-in
 		Top Screw
 		Operational life
 
i-8SmartOW-025E
OW-10E		2
9		6-32
6-32		10,000 hrs
8,000 hrs
i-80SmartOW-20E
OW-60E		18
53		6-32
1/4-20		5,000 hrs
5,000 hrs
CD-150MSpringSJ-50
SJ-130		8~50
50~130		5/16-18
3/8-16		2,500 uses
2,500 uses
DI-11SpringSJ-50
SJ-200		8~50
50~175		5/16-18
3/8-16		2,500 uses
2,500 uses

Related Products