Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lb-ft. It has an accuracy of ± .5% F.S., ± 1 LSD and measures torque in first peak, peak and real time modes (selectable). Do not use with impact tools (Ask for DI-1M impact wrench torque tester).
Standard RS-232 output is available for analysis by Imada data acquisition software SW-1S.
DI-3-1P Digital Torque Tester
DI-3-1P Digital Torque Tester
OLD MODEL see DIS-IP Series
DI-3-1P Ranges
| Model | Capacity | |||
| DI-3-1P (Drive Size) | lbf-in | kgf-cm | N-cm | N-m |
| DI-3-1P5 (1/4") | 0.30~44.00 | 0.30~50.00 | 3.0~500.0 | - |
| DI-3-1P50 (3/8") | 3.0~440.0 | 3.0~500.0 | 30~5000 | - |
| DI-3-1P200A (1/2") | 30~1800 | 30~2000 | - | 3.0~200.00 |
| lbf-in | lbf-ft | kgf-m | N-m | |
| DI-3-1P200 (1/2") | - | 3.0~145.0 | 0.30~20.00 | 3.0~200.0 |
| DI-3-1P500 (3/4") | - | 3.0~362.0 | 0.30~50.00 | 3.0~500.0 |
DI-3-1P Standard Features
- Heavy duty metal construction
- lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
- Peak, Real Time and Peak Down measuring modes (selectable)
- Programmable High and low setpoints with GO/NO GO LED indicators
- Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
- 400 data memory for recall or for SPC download
- Both clockwise and counterclockwise operation
- RS-232 output for SPC capability (peak data only)
- Runs on internal NiCad batteries (8 hour use)
- AC adapter/charger included
