E2 Durometer / Hardness Tester

E2 durometer application

E2 durometer applicationE2 Durometer / Hardness TesterE2 durometer hardness selectorE2 durometer operation

E2 Durometer / Hardness Tester

E2-A Type Shore A Normal Rubber
E2-C Type Asker C Soft Rubber
E2-D Type Shore D Hard Rubber & Plastics
E2-E Type Shore E Soft Rubber

  • e2-a,e2-d,e2-e,e2-c.e2p-a,e2p-d,e2p-e,e2p-c

E2 durometers now feature an environmentally friendly magnesium alloy housing and best value pricing. E2 durometers are quick and easy to operate with a high degree of repeatability. Optional peak indicators are available on each model.

Hardness is an essential characteristic of rubber, elastomers and plastic products. Select the optimum durometer type based upon material hardness. E2 models are available in Durometer Types: Shore A, Shore D and Shore E Hardness.


As the durometer is pressed against the sample, the material resistance force and indentor spring load balance. The depth of the indentor is measured, which provides a measure of the material’s hardness. Values are based upon a 100 point scale (accuracy ±1 point). However, as time elapses the indicator will “creep” back so that a reading taken a few seconds after the indentor makes contact with the sample will be less than the peak reading. Durometers offer a peak indicator as an option to more closely monitor the difference between peak and “creep”.

E2 Durometer Selection

ScaleShore AAsker CShore DShore E
IndentorFlat pointHemisphericalCone pointHemispherical
MaterialNormal rubberSoft rubberHard rubber & plasticSoft rubber
StandardASTM D-2240 JIS K-7312 ASTM D-2240 ASTM D-2240
Measuring Force1 kgf1 kgf5 kgf1 kgf
  • Best value pricing
  • Environmentally friendly magnesium alloy housing
  • Calibration cert traceable to NIST included
  • Optional ISO-17025 calibration available