GEK Digital Ratchet Torque Wrench

Digital Ratchet Torque Wrench

Digital Ratchet Torque WrenchGEK030-C3E Digital Ratchet WrenchGEK060-R3E Digital Ratchet WrenchGEK085-R3E Digital Ratchet WrenchGEK135-R4E Digital Ratchet WrenchGEK200-R4E Digital Ratchet WrenchLarge LED indicator is easily viewed from an angle.Forged steel ratchet head with 36 tooth gear with double claw ratchet allows smaller movement between clicks.Quick Spinner/Converters allow users to quickly rundown the bolt or nut using their fingers before applying torque.Quick spinners allow users to quickly  rundown the bolt or nut using their fingers before applying torque.

GEK Digital Ratchet Torque Wrench

GEK030-R2E capacity 265 lbf-in
GEK030-C3E capacity 265 lbf-in
GEK060-R3E capacity 531 lbf-in
GEK085-R3E capacity 752 lbf-in
GEK135-R4E capacity 1195 lbf-in
GEK200-R4E capacity 1770 lbf-in

  • gek030r2e,gek030c3e,gek030r3e,gek030r4e,gek060r2e,gek060c3e,gek060r3e,gek060r4e,gek085r2e,gek085c3e,gek085r3e,gek085r4e,gek135r2e,gek135c3e,gek135r3e,gek135r4e,gek030-r2e,gek030-c3e,gek030-r3e,gek030-r4e,gek060-r2e,gek060-c3e,gek060-r3e,gek060-r4e,gek085-r2e,gek085-c3e,gek085-r3e,gek085-r4e,gek135-r2e,gek135-c3e,gek135-r3e,gek135-r4e,gek-030r2e,gek-030c3e,gek-030r3e,gek-030r4e,gek-060r2e,gek-060c3e,gek-060r3e,gek-060r4e,gek-085r2e,gek-085c3e,gek-085r3e,gek-085r4e,gek-135r2e,gek-135c3e,gek-135r3e,gek-135r4e,gek-030-r2e,gek-030-c3e,gek-030-r3e,gek-030-r4e,gek-060-r2e,gek-060-c3e,gek-060-r3e,gek-060-r4e,gek-085-r2e,gek-085-c3e,gek-085-r3e,gek-085-r4e,gek-135-r2e,gek-135-c3e,gek-135-r3e,gek-135-r4e

The GEK Digital Ratchet Torque Wrench has a forged steel ratchet head and features a unique power sensor in the ergonomic handle. The forged steel ratchet head with positive-lock keeps sockets on the drive. The 36 tooth gear with a double claw ratchet allows smaller movement between clicks. The unique design of the sensor keeps the torque point in the center of your hand. The built-in sensor accurately detects and analyzes the load applied to the grip to enable more precise torque measurement regardless of hand position and skill level of the operator.

Operation Modes

These torque wrenches measure in peak mode, peak with auto zero reset, and real time. Five programmable torque presets stored in memory enable the user to check frequently used values. The presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of the preset torque value using LED and audible indicators (Presets cannot be set at less than 10% of capacity). Selectable units of lbf-in, lbf-ft, kgf-m, and N-m.

What’s Included?

All wrenches include a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge. All wrenches are sold as a kit and include: wrench, hard plastic carrying case and operation manual. Uses a lithium coin battery, Panasonic CR2354, which is included.

For higher accuracy and output see DIW digital torque wrenches.

Digital Ratchet Wrench Ranges
Model No.lbf-inlbf-ftkgf-mN-mDrive
Accuracy±1.5% F.S.
Measuring directionCW and CCW
Measuring unitSelectable lbf-in, lbf-ft, kgf-m, N-m
Data Memory5 (storable Target torque values), 1 (Pass/Fail Mode)
Auto Shut OFFPower automatically turns off after 2 minutes of non-use
BatteryLithium coin battery CR2354
Battery LifeApprox. 2 months (100 usages per day)

GEK Series Standard Features

  • High accuracy ±1.5% F.S. both CW and CCW directions
  • The best known, rugged, high quality tools for over 60 years!
  • Peak, peak with auto zero reset and Real Time modes
  • Five programmable torque presets ideal for frequent operations.
  • Pass/Fail mode counts fasteners tightened within programmed High/Low limits, using LED and audible alerts
  • Selectable units, lbf-in, lbf-ft, kgf-cm, N-m
  • ISO-6789 Compliant
  • Calibration certificate traceable to NIST and carrying case included
Optional Quick Spinner and Spinner/Converters

Quick Spinners and Spinner/Converters allow users to quickly rundown the bolt or nut using their fingers before applying torque.

BE2-Q 1/4″ to 1/4″ Quick Spinner
BE3-Q 3/8″ to 3/8″ Quick Spinner
BE4-Q 1/2″ to 1/2″ Quick Spinner

Spinner/Converters have a lower profile than conventional adapters.

BAE23 converts 1/4″ to 3/8″ drive
BAE34 converts 3/8″ to 1/2″ drive

Optional Protective Cover

Model GEK-A, complies with IPX4, allows operation and protects the wrench from splashes in production environments.