GLK Digital Torque Screwdriver

GLK Digital Torque Screwdriver

GLK Digital Torque ScrewdriverGLK Digital Torque ScrewdriversGLK Digital Torque Screwdriver with Ratchetglk-screwdriver-kit

GLK Digital Torque Screwdriver

Series GLK Digital Torque Screwdrivers

60, 250, 500 cN-m capacities

  • glk060e,glk250e,glk500e,glk060-e,glk250-e,glk-060e,glk-250e,glk-500e,glk-060-e,glk-250-e

GLK Digital Torque Screwdrivers are compact, lightweight, and feature, LED and audible alarms, ergonomic handle, push button controls, and are battery powered.

Measure torque in peak or real time modes. Auto zero mode resets peak measurements automatically (1~10 seconds). Selectable units of ozf-in, lbf-in, and cN-m.

Five programmable torque presets stored in memory enable the user to check frequently used values. The presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of the preset torque value using LED and audible indicators which enable users to tighten to within 10% of a preset torque value.

Pass/Fail mode counts the number of fasteners tightened within programmed high and low torque limits.

Optional ratchet (RA2) with 1/4″ square drive, CW, CCW and fixed operation is available.

For higher accuracy and data output, see DID-4 digital torque screwdrivers.

GLK Digital Torque Screwdriver Ranges

Accuracy ± 1.5% F.S., ±1 LSD
Model No.ozf-inlbf-incN-m
Accuracy±1.5% F.S.
Measuring directionCW with display facing you, CCW with display facing away from you
Measuring unitSelectable lbf-in, lbf-ft, kgf-m, N-m
Data Memory5 (storable Target torque values), 1 (Pass/Fail Mode)
Auto Shut OFFPower automatically turns off after 2 minutes of non-use
BatteryLithium coin battery CR2354
Battery LifeApprox. 2 months (100 usages per day)
  • Rugged, high quality production tools
  • High accuracy ±1.5% F.S. both CW and CCW directions
  • Selectable units, ozf-in, lbf-in, cN-m
  • Peak, peak with auto zero reset and Real Time modes
  • Five programmable torque presets ideal for frequent operations.
  • Pass/Fail mode counts fasteners tightened within programmed
    High/Low limits, using LED and audible alerts
  • ISO-6789 Compliant
  • Kit includes screwdriver with 1/4″ square drive, 1/4″ square drive to 1/4″ hex magnetic